C-24 - Swinger 10" and double 6" Targets: $294.00 Plus Shipping
The swinger frame is easily assembled by sliding the legs into the pockets on the end plates, then sliding the leg/plate assembly and targets onto the 1” diameter support shaft. No tools are required for the frame assembly, and the legs can be positioned to provide a stable unit on uneven ground.
The frame can be easily disassembled for transport in your vehicle. The support shaft is 30” from the ground to provide clearance for larger targets, like the 2/3 IDPA torso. The targets are bolted to the hanger brackets with ½” Grade 8 Hardened Carriage bolts, hardened washers and locknuts.
This unit includes the frame, 10" target, (2) 6" targets, single bracket, double bracket and all required hardware.
Overall size: 60 w x 28 dp x 30 h - Rated for 3000 FPS(Feet Per Second) at Impact.
Shipping weight: 57 lbs
The targets produced by CMP are made from AR500 steel for long life and minimum damage due to bullet strikes. The stands, bases and mounting brackets are made from normal steel and can be damaged by repeated bullet strikes, and will not withstand rifle bullet strikes. The design of the targets protects much of the base or hanger with the AR500 target face, but occasional hits will occur. The hardware used to mount the targets is Grade 8 and will better withstand repeated bullet strikes. Never use a lower grade of bolt. Replacement hardware is available from CMP.
Pistol shooting at our targets should be performed beyond a range of 15 yards.
Rifle (max 3000 feet per second at impact) shooting at our targets should be performed beyond a range of 100 yards.
Never use armor piercing or steel core bullets to shoot any target
Always place the target in front of a backstop to capture any bullets which miss the target.
Always inspect the targets and support structure before and after use for damage and for proper and safe operation.