C-29 - Hostage Steel Target - 2/3 Torso: $274.00 Plus Shipping
The hostage target has the head of a "bad guy" looking over the shoulder of the "hostage". When hit, the "bad guy" flips from one side to the other side.
You can use this target for practice on the hostage stages of a competition where the torso is a no-shoot target, or you can practice your regular body and head shots on the torso section only.
The target comes complete with stand and all hardware required. The post fits into a socket on the base, and the torso is bolted to the post with Grade 8 hardened carriage bolts.
The target is a 2/3 IDPA torso (12 w x 20 h), the hostage head is 4.5" diameter. The targets are made from 3/8" AR500 steel for extreme long life and excellent impact resistance.
Overall size: 24 w x 34 dp x 45 h - Rated for 3000 FPS(Feet Per Second) at Impact.
Shipping weight: 52 lbs
The targets produced by CMP are made from AR500 steel for long life and minimum damage due to bullet strikes. The stands, bases and mounting brackets are made from normal steel and can be damaged by repeated bullet strikes, and will not withstand rifle bullet strikes. The design of the targets protects much of the base or hanger with the AR500 target face, but occasional hits will occur. The hardware used to mount the targets is Grade 8 and will better withstand repeated bullet strikes. Never use a lower grade of bolt. Replacement hardware is available from CMP.
Pistol shooting at our targets should be performed beyond a range of 15 yards.
Rifle (max 3000 feet per second at impact) shooting at our targets should be performed beyond a range of 100 yards.
Never use armor piercing or steel core bullets to shoot any target
Always place the target in front of a backstop to capture any bullets which miss the target.
Always inspect the targets and support structure before and after use for damage and for proper and safe operation.