C-31 Gong Frame and 16" Steel Target
  • Description

  • Related Targets

  • Safety Information

 

C-31 - Gong Frame and 16" Steel Target: $220.00 Plus Shipping

 

The gong frame is easily assembled by sliding the legs into the pockets on the end plates, then sliding the leg/plate assemblies onto the 1” diameter support shaft. No tools are required and the legs can be positioned to provide a stable unit on uneven ground.

The frame can be easily disassembled for transport in your vehicle. The support shaft is 30” from the ground to provide clearance for larger targets, like the 18” diameter gong. The chains are bolted to the targets with ½” Grade 8 hardened carriage bolts, hardened washers and locknuts and the height of the target is easily adjustable by sliding any link of the chain onto sturdy hooks which are welded on the support shaft.

 

16" Gong Target included.

 

Overall size: 60 w x 28 dp x 30 h - Rated for 3000 FPS(Feet Per Second) at Impact.

Shipping weight: 57 lbs

     
     
     
     
     
     

The targets produced by CMP are made from AR500 steel for long life and minimum damage due to bullet strikes. The stands, bases and mounting brackets are made from normal steel and can be damaged by repeated bullet strikes, and will not withstand rifle bullet strikes. The design of the targets protects much of the base or hanger with the AR500 target face, but occasional hits will occur. The hardware used to mount the targets is Grade 8 and will better withstand repeated bullet strikes. Never use a lower grade of bolt. Replacement hardware is available from CMP.


Pistol shooting at our targets should be performed beyond a range of 15 yards.
Rifle (max 3000 feet per second at impact) shooting at our targets should be performed beyond a range of 100 yards.
Never use armor piercing or steel core bullets to shoot any target
Always place the target in front of a backstop to capture any bullets which miss the target.
Always inspect the targets and support structure before and after use for damage and for proper and safe operation.

 

 

 

 

Qualification Targets Inc © 2017

| 1145 Clyde Hanson Drive, Hammond, WI | 866-498-8228 | 715-796-5201 |