C-40 Tactical Sniper Steel Target
  • Description

  • Related Targets

  • Safety Information

 

C-41 - Tactical Hostage Target - Full Torso: $499.00 Plus Shipping

 

Sharpen your rifleman skills with this new Sniper Target which offers three targets in one. Hitting the full size IDPA torso is for the basic rifleman, or aim for the the 4" diameter cutout in the chest for the more advanced rifleman. The precision shooter will go for the head shot, the eye opening is only 3.5" x 1.75"

When the chest or eye opening is hit, the reactive target flips to the side of the torso.  Shoot it again to flip it back! No manual resetting required, just keep shooting!

The 3/8" thick target serves for most calibers and the 1/2" thick target is for the larger magnum rounds.

Minimum rifle range is 100 yards, maximum bullet velocity is 3000 fps at impact. Not for .50 BMG!

 

Overall size: 24 w x 34 dp x 55 h

Shipping weight: 82 lbs

 

     
     
     
     
     
     

The targets produced by CMP are made from AR500 steel for long life and minimum damage due to bullet strikes. The stands, bases and mounting brackets are made from normal steel and can be damaged by repeated bullet strikes, and will not withstand rifle bullet strikes. The design of the targets protects much of the base or hanger with the AR500 target face, but occasional hits will occur. The hardware used to mount the targets is Grade 8 and will better withstand repeated bullet strikes. Never use a lower grade of bolt. Replacement hardware is available from CMP.


Pistol shooting at our targets should be performed beyond a range of 15 yards.
Rifle (max 3000 feet per second at impact) shooting at our targets should be performed beyond a range of 100 yards.
Never use armor piercing or steel core bullets to shoot any target
Always place the target in front of a backstop to capture any bullets which miss the target.
Always inspect the targets and support structure before and after use for damage and for proper and safe operation.

 

 

 

 

Qualification Targets Inc © 2017

| 1145 Clyde Hanson Drive, Hammond, WI | 866-498-8228 | 715-796-5201 |